Josephine Victory Valance Pattern Specifications:
- Valance is pole mounted
- Instructions are included for board mounting or for a “floating mount” (see photo below).
- Valance may be cut railroaded, if desired
- Valance is 36″ as shown, but can be altered to any width by adding sections and by adjusting width of the swag sections
- Each new horn/swag section will add 16″ width to the valance
- Valance varies from 15″ (horn) to 18″ (bottom of swag) in length and can be lengthened to 22″
- Cascades are 31.5″ long, not including trim, and can be altered in length
- Valance has buttons or chair tassels as trim on the horns
- Valance has optional trim along the bottom edge
- Valance can be contrast lined or self-lined
Josephine Victory Valance Pattern Includes the Following:
- Full-size pattern printed on heavy 20 lb. paper
- Yardage requirements
- Supply list
- Lots of illustrations
- Packaged in a sturdy, oversized re-closeable bag
- Access to the online FAQ as questions are submitted to the site
- Email support
- Two sets of instructions (for most patterns): one full set of complete, detailed instructions & our unique “Instructions at a Glance” (a summary sheet to place above the sewing machine to keep work on track for more experienced workrooms and sewers)
Josephine Victory Valance Pattern Alternate looks:
This pattern has instructions to create this additional valance look, with the valance mounted on blocks of wood instead of on a pole. (Instructions on how to make the long panel under the valance are not included.)